Approach to Validate ISPM-15 Compliance for Commercial Treatment Certification of Dielectric Standard Heating of Bulk Solid Wood Packing Materials using Radio Frequency

To substantially reduce the risk of alien invasive species moving to new geographic areas, phytosanitary treatment of wood packaging materials (WPM) in compliance with the International Standard of Phytosanitary Measures No. 15 (ISPM-15) is required by trading partners. Approved treatments include conventional heating, methyl bromide and sulfuryl fluoride fumigation, and dielectric heating (DH). The DH standard was officially adopted in 2013 but has not been practiced commercially due primarily to insufficient operational validation at commercial scale. In 2022, we converted our 50-kW radio frequency (RF) unit with a 1,200-board foot capacity from an oscillator electromagnetic field power generator to a solid-state power supply, which allows for selective power input adjustments during treatment; we also switched from a five-plate to a three-plate winged electrode system to improve heating uniformity. Each loading cycle can treat sufficient material to build ∼94 standard Grocery Manufacturers Association pallets. Our research team characterized the dielectric heating pattern and options for monitoring wood temperatures over a wide-ranging test matrix of WPM that varied by wood species, dimension, moisture content, and loading configuration. We found that this upgraded RF system markedly reduced treatment times and improved heating uniformity, allowing us to develop methods that can be used to verify compliance with ISPM-15 for improved technology transfer to industry. We also discuss the operational cost of RF treatment and make general cost comparisons to conventional heat treatment for WPM.